Page 6 - Waterpompen

FRESH WATER PUMPS

4029 / 4009 SERIES PUMPS 4049 HIGH FLOW PUMP

Model #
Shut-Off
Amps
Shut-Off
Amps
Model #
Name OEM/Aftermarket Voltage Dimension Flow Rate (Max.) Pressure Name OEM/Aftermarket Voltage Dimension Flow Rate (Max.) Pressure
4029-181-A32 8.1” x 4.9” x 4.3” 2.0 GPM 20 PSI* 10.3” x 4.9” x 4.8” 4 GPM 40 PSI*
(4029-181-B32) 12 VDC (206 x 125 x 110mm) (7.6 LPM) 2.8 (1.4 BAR) 4049 4049-153-B86 12 VDC (260 x 125 x 122 mm) (15.1 LPM) 10 (2.7 BAR)
4029-181-A43 8.1” x 4.9” x 4.3” 2.0 GPM 25 PSI* 10.3” x 4.9” x 4.8” 4 GPM 55 PSI*
(4029-181-B43) 12 VDC (206 x 125 x 110mm) (7.6 LPM) 3.0 (1.7 BAR) 4049 4049-153-B75 12 VDC (260 x 125 x 122 mm) (15.1 LPM) 10 (3.8 BAR)
A 4029-181-A54 12 VDC 8.1” x 4.9” x 4.3” 2.0 GPM 3.2 30 PSI* *With By-Pass
(4029-181-B54) (206 x 125 x 110mm) (7.6 LPM) (2.0 BAR) Being the next pump in the by-pass Flow Reaction Technology Series, this pump has a unique one-piece diaphragm
4029 and internal by-pass to assure smooth flow, long life and top performance in any plumbing system. Designed and
4029-110-A02 8.9” x 4.9” x 4.2” 2.2 GPM 20 PSI
(4029-110-B02) 12 VDC (225 x 125 x 106mm) (8.3 LPM) 2.8 (1.4 BAR) built for high flow, low noise, smooth flow with no rapid cycling and Shurflo reliability, this fresh water demand pump
is quiet and can run dry without damage. Mounts in any position. This pump is designed to replace both the 4900
4029-110-A03 8.1” x 4.9” x 4.3” 2.2 GPM 25 PSI and 5900 Smart Sensor series products.
(4029-110-B03) 12 VDC (206 x 125 x 110mm) (8.3 LPM) 3.0 (1.7 BAR)
4029-110-A04 12 VDC 8.1” x 4.9” x 4.3” 2.2 GPM 3.2 30 PSI
(4029-110-B04) (206 x 125 x 110mm) (8.3 LPM) (2.0 BAR)
4009-101-A32 8.1” x 4.9” x 4.3” 3.0 GPM 20 PSI*
(4009-101-B32) 12 VDC (206 x 125 x 110mm) (11.3 LPM) 4.2 (1.4 BAR)
4009-101-A54 8.1” x 4.9” x 4.3” 3.0 GPM 30 PSI*
(4009-101-B54) 12 VDC (206 x 125 x 110mm) (11.3 LPM) 4.5 (2.0 BAR) Commercial Grade Heavy Duty Motor
4009-101-A87 8.1” x 4.9” x 4.3” 3.0 GPM 45 PSI* Superior Design Built for Power, Built to Last
(4009-101-B87) 12 VDC (206 x 125 x 110mm) (11.3 LPM) 5.3 (3.1 BAR)
4009
55 PSI*
8.1” x 4.9” x 4.3”
3.0 GPM
4009-101-A65 12 VDC (206 x 125 x 110mm) (11.3 LPM) 4.5 (3.8 BAR) Thermal Overload Protection
Added Safety and Peace of Mind
4009-131-A54 8.1” x 4.9” x 4.3” 3.0 GPM 30 PSI*
(4009-131-B54) 24 VDC (206 x 125 x 110mm) (11.3 LPM) 2.9 (2.0 BAR) Die Cast Components
8.1” x 4.9” x 4.3”
40 PSI*
3.0 GPM
4009-131-A26 24 VDC (206 x 125 x 110mm) (11.3 LPM) 2.9 (2.7 BAR) Solid Construction
*With By-Pass 4 Independent Chambers
Shurflo’s new 40X9 fresh water pump design was created with a unique one-piece diaphragm and internal Smooth, Even Flow
by-pass (on applicable models), assuring long life and top performance in all plumbing systems. Designed as the O-Ring Check Valve
next legendary pump to exceed the expectations of our customers, the 40X9 pump is constructed for high flow Long Lasting, Durable Design
demand, low noise and no rapid cycling. Shurflo’s quality reputation has been built on the reliability and
dependability of every pump we build. The 40X9 fresh water automatic demand pump is super quiet, thermally
protected and can run dry without damage.
16 Gauge Wires with Strain Relief Adjustable Bypass and Pressure Shut-off Switch
Designed to Deliver the Power and Carry the Load
Reduced Cycling and Hammering Adaptable to any Installation
Thermal Overload Protection
Added Safety and Peace of Mind Umbrella Valves
3-inch Diameter Motor Industry Benchmark for Priming and Long Life
Superior Design, Built for Power, Built to Last Nylon Base with Neoprene Feet
4 Independent Pump Chambers High Strength and Over-Molded Diaphragm
Smooth, Even Flow Vibration Resistance (Single-Piece Construction) High Performance Leakproof Design
Oversized Brushes and Commutator Dual Motor Shaft Ball Bearings Coined Motor and Drive Bearings
Threaded Ports
Positive Seal with Proven Resistance Maximized Electrical Efficiency Smooth Performance and Long Life
O-Ring Check Valve
Long-Lasting Durable Design
Adjustable Pressure Shut-off (Micro Switch)
Proven Switching Design with
Real World Control

Adjustable Bypass
Real Bypass Design Adaptable to Any Installation

Umbrella Valves
Industry Benchmark for Priming and Long Life
Over-molded Diaphragm
(Single-Piece Construction) High Performance Leakproof Design
4 Pressed-in Bearings 5
Solid Construction, Long Life
Thermoplastic Elastomer (TPE) Baseplate
4 Superior Dampening and Vibration Resistance 5