Page 12 - Faac_Verkeerspalen_Kiestraparkeertechniek
P. 12
J275HA AUTOMATIC
retractable traffic bollard
1. Guaranteed for high frequency use
2. “Full optional” product; supplied equipped with the main
accessories
3. extreme care in the selection of materials
4. Simplified maintenance (possible with just one person)
5. Perfect interchangeability with first generation bollards
6. Fast and silent movement
STANDARD vERSIONS IN PAINTED STEEL
Models Height Finish Item code
J275 HA 600 600 mm painted steel 116000
J275 HA 800 800 mm 116001
The product comes with:
• 7 mm thick steel cylinder with cataphoresis treatment and painted
• powder paint, dark grey metallised ral 7021
• flashing light ring with central led
• acoustic movement buzzer
• emergency lowering in the event of a power cut (can be excluded)
J275HA
STANDARD vERSIONS IN AISI 316 STAINLESS STEEL
Models Height Finish Item code
J275 HA 600 600 mm satin-finished aiSi 316 116030
DIMENSIONS AND TECHNICAL SPECIFICATIONS J275 HA 800 800 mm stainless steel 116031
drive Hydraulic actuator The product comes with:
cylinder stroke 600 mm 800 mm • 6 mm thick stainless steel cylinder with satin-finished treatment
cylinder diameter 275 mm • flashing light ring with central led
cylinder material standard version Steel Fe 360 (7 mm thickness) • acoustic movement buzzer
Standard cylinder surface treatment cataphoresis and polyester powder paint, dark grey metallised ral 7021. • emergency lowering in the event of a power cut (can be excluded)
cylinder material special stainless steel version Satin-finished aiSi 316 (6 mm thickness)
cylinder top part (head) aluminium ral 9006
rise time about 5 sec about 7 sec.
descent time (standard) about 2.8 sec about 3.5 sec
descent time (rapid) (*) About 1 sec About 1.2 sec INSTALLATION ACCESSORIES
Hydraulic pump power supply 230 Vac +6% - 10%; 50/60 Hz
Power consumption 220 W Item Item code
Protection rating iP 56 Pit JP 275/600 for bollard H600 complete with counter frame 116100
recommended Use intensive use (Traffic)
Standard refracting strip Height 55 mm
Manual lowering operation Possible with hydraulic circuit mechanical release
impact resistance 38 KJoules/painted steel - 67 KJoules/stainless steel Pit extension JP 275/800* for bollard H800* 1161001
Break-in resistance 128 KJoules/painted steel - 207 KJoules/stainless steel
Total weight 112kg (diss.) + 55kg (pit) 130kg (diss.) + 65kg (pit)
operating temperature -15 °c / +55 °c (*) For the 800 mm version the following two elements must be ordered: 116100 + 116101.
J275HA
operating temperature with heater (optional) -25 °c / +55 °c
Pit to be walled in with modular cylinder profile 560x560x950 mm 560x560x1,220 mm
connection cable Standard 16+1 conductors, minimum section 1,5 mm (not supplied) OPTIONAL ACCESSORIES
Maximum length 50 m
Item Item code
Pit heater JH275 (to extend operation up to -25°c) 116200
ELECTRONIC EQUIPMENT
Item Item code Pit cover Jc275 116201
Bollard electronic board Je275 able to 116300
manage up to four bollards
J275 Ha